-
KOCH CHEMIE LEATHER STAR 1L
R435,16Premium leather care with a natural semigloss finish. For revitalising and preserving smooth leather, suede
and perforated leather materials on vehicle seats,sofas,etc.Leather Star is easy to use and creates a
pleasant fragrance, a colour intensifying appearance and a supple and soft feel, without causing undesirable
slipperiness. The use of premium active ingredients from cosmetics makes the leather supple and provides
prolonged protection against new dirt and becoming brittle.Areas of use
Smooth leather, suede and perforated leather materials (motor vehicles, furniture, etc.)
Recommendations for useClean the dirt first with a suitable cleaner (eg Pol Star), wipe with damp cloth and dry thoroughly. Shake
Leather Star before use, apply evenly and extensively to the leather surfaces with a sponge or soft microfibre
cloth and leave to dry. Remove any excess with a soft cloth.Warnings
Before using, check suitability and compatibility.
Notice
This product information can advice you only without obligation. Liability on our part can not be derived.
Please check whether the product is suitable for your application. We will be pleased to assist you. -
GLOSSWORX BACKING PLATE COMBO
R885,50ROTARY BACKING PADS
1X 5INCH
1X 3INCH
1X2INCH
1X1INCH
PLUS PADS
TOTAL R700
-
GLOSSWORX MICROFIBER 10 PACK 450 GSM B/Y/G
R573,85Premium microfiber 40 x 40, 70% polyester / 30% Polyamide, extremely soft and absorbent towel is perfect for the removal of water-less car wash, compounds, polishes, waxes, and sealants.
-
GLOSSWORX TWO FACE MICRO FIBER TOWEL 600GSM 5 PACK 60X40
R504,74Two Faces
The 2-Faced Towel combines two ultra-soft towels into one plush finishing towel.One side easily highlights any dirt or debris to cue when to flip to the gray side for final scratch-free buffing. The twin high-pile length easily and gently soaks up wash water, detail sprays, and waterless washes without scratching to reveal a deep lustrous reflection below.
Premium Blend
Every luxurious towel is woven with plush symmetrical strands that are sure to put a smile of the face of even the toughest auto enthusiasts. 2-Faced Towels are made with a select 70/30 blend of microfiber for exceptional softness and durability, and a luxurious silk-banded edge to further reduce the chances of scratching sensitive paintwork.
-
NEXPTG PROFESSIONAL PAINT GAUGE
R7906,25NexPTG Professional EN
An advanced version of the NexPTG lacquer thickness gauge, which enables fast, accurate and intuitive vehicle testing. The Professional version has a movable head allowing for precise measurements on concave and convex elements.
• Testing substrate: Steel [Fe] / Zinc-plated steel [Fe+Zn] / Aluminum [Al]
• Recognized substrate types: [Fe] / [Fe+Zn] / [Al]
• Range of measurement: 0 – 2500 μm (0 – 98.43 mils)
• Type of probe / End of probe: movable/spherical
• Possible measurement on curvatures (profiled probe housing)
• Resolution of measurement: 1 μm (0.04 mils)
• Measurement memory: up to 4000 items
• Wireless transmission: Bluetooth 4.0 LE
• SAPL Extended: lacquer coating analysis system
• Suggested measurement points
• Creation and export of measurement history
• Creation and export of reports
• API communication
• Supported systems: iOS / Android -
KOCHCHEMIE 5 INCH FINE CUT PAD
R360,53Koch Chemie Fine Cut Pad (medium)
Medium abrasive sponge for removing moderate weathering and scratches using the Fine Cut F6.01.
The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing.
The optimised reticulation (open cellular structure) and cell count contributes to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier.
The colourful non-woven material, suitable for polishing, ensures process safety.
Ø:
150 x 23 mm
126 x 23
76 x 23
Compression hardness: 12
Abrasiveness: 5
-
KOCH CHEMIE MICRO CUT & FINISH P3.01 1L
R1250,96Micro Cut & Finish P3.01
Micro Cut & Finish P3.01Micro polishing compound with carnauba wax Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks,holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish iseconomical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones.
Cut: 3,2
Gloss: 9,5Areas of use Paintwork of cars, commercial vehicles, motor cycles, etc.
-
KOCH CHEMIE 5 INCH MICRO CUT PAD
R360,53Koch-Chemie Micro Cut Pad
Micro Cut Pad High-quality special sponge for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 and Micro Cut & Finish P3.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability.
The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contribute to a high-shine finish and very good hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier.
The colourful non-woven material, suitable for polishing, ensures process safety.
Ø
150 x 23 mm
126 x 23 mm
76 x 23 mm
Compression hardness: 10
Abrasiveness: 5
-
KOCH CHEMIE MICRO CUT M302
R1137,24Koch Chemie M3.02 Micro Cut Anti-Hologram Finishing Polish compound
Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces.
Cut: 3,2
Gloss: 9,0
Usage:
For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure until a transparent film appears, ie, until the aluminium oxide in the polish has completely broken down. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.