Shop

Filter

Showing 172–180 of 221 results

Show

Clear All

FEYNLAB® HYBRID CERAMIC DETAILER
Detailer – A super hydrophobic, durable, slick, glossy, spray-on and wipe-off maintenance spray, drying aid, and sealant. Protects coatings from water spotting during the curing process.
FEYNLAB® DETAILER is more than a 21st century ‘quick detailing spray.’ Utilizing FEYNLAB’s® true nano technology, DETAILER contains water-based polymeric cleaning agents which clings to light layers of dust and contaminants, removing them thoroughly. DETAILER adds a durable layer of significant hydrophobic & ‘self cleaning’ properties and additional gloss to vehicle exterior surfaces.

DETAILER is an ideal product to protect ALL coatings on the market from water spotting during the curing process.

Product Benefits
- A durable ‘spray sealant’ which doubles as a traditional quick detailing product.
- Use as stand-alone protection or to top automotive ceramic nano coating hydrophobic properties.
- An Excellent spot cleaner or drying aid after washing vehicle surfaces.
- Safe for all vehicle exterior surfaces: paint, plastic, vinyl, rubber, etc.
- Completely water based, Detailer is completely Body Shop safe – silicone free.
- Perfect final step product to protect all coatings from water spotting during curing.
Durability & Application Surfaces
Durability – 3-4 months.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
- Black textured plastics
- Headlights & Tail-lights
- Black piano trim
- Clear-coated painted wheel rims & calipers
Included
500ml Bottle.

Surface Preparation
Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness.

Directions
- Place vehicle in a well lit, cool, & contamination free environment.
- Thoroughly rinse vehicle of all loose dust, debris, and topical contamination.
- Clean all exterior vehicle surfaces with a PURE WASH for a traditional wash, or with PURE RINSELESS for a waterless or rinseless wash methods.
Application Instructions
1. Using a clean microfiber towel, apply DETAILER to the towel. Prime the towel with 3-5 sprays.
2. For each section, the size of half a door or a quarter of a hood, apply 3-4 additional sprays to the towel.
3. Spread evenly over the surface. Amount of product should be enough to evenly coat the area without over saturation.
4. After applying, immediately, buff the area clear with another clean microfiber towel.
* * Use as maintenance topper or drying aid: Wash surfaces thoroughly, remove the majority of water, and then apply.

Recommended Maximum Area of Application:

HALF of a door or 1/4 of a hood, then wipe off in same pattern as application.

Final Inspection

Carefully inspect all finished panels for leftover residue during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. Product residue is easier to remove if caught soon after final wipe than later on.
R1233,63
Add to cart
FEYNLAB® OVERCOAT 30ml
FEYNLAB® TOPCOAT is far and away the slickest and most hydrophobic coating in the Feynlab family. Its sole purpose is to add great water sheeting and self cleaning properties to any of our ceramic coatings. In addition, the super low free surface energy of TOPCOAT causes the surface to feel silky smooth to the touch.

Product Benefits
TOPCOAT keeps exterior vehicle surfaces cleaner for longer due to its superior hydrophobic and self-cleaning properties. This means vehicles will remain cleaner over time and, when washing, water and contamination will release from the surface with great ease.

FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

Durability & Application Surfaces
Durability – 1 year.

Application includes 1 component layer, reaching an overall film build between 1-2 microns.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
- Black textured plastics
- Headlights & Tail-lights
- Black piano trim
- Clear-coated painted wheel rims & calipers
Shelf Life
Unopened – 1 year. Opened – Use within 1-2 months. ALWAYS keep cap on bottle when not in use.

Included
30ml (1oz) FEYNLAB® TOPCOAT

Cautions
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

Paint Preparation
Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

Directions
Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2-3 microfiber sponge applicators, or 1-2 foam applicators on hand BEFORE application.

Once the car is prepared, we recommend taping off and protecting all unapproved surfaces. By performing this step, you minimize the risk of etching by the solvents in FEYNLAB® TOPCOAT on unapproved surfaces such as rubber lining around windows and doors. Avoid these surfaces with TOPCOAT and wipe off immediately if any product accidentally finds these surfaces.

Shake TOPCOAT vigorously for 2 min before use. Open the bottle and allow the coating 1min of air exposure.

If applying over another Feynlab coating, wait 2 hours for the base coating to set up. Then Apply in the same application pattern as the base coating.

Application Instructions
1. Apply enough TOPCOAT to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
2. Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
3. Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
4. TOPCOAT should be applied to only one panel, or half a panel at a time if it is larger.
5. Immediately wipe off TOPCOAT following same pattern of application, using a clean microfiber towel.
6. If the surface is difficult to buff clear (hazy) reduce the application area.
Recommended Maximum Area of Application:
One panel, then wipe off in same pattern as application.

Final Inspection
Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

Infrared Curing (Optional)
TOPCOAT Alone
Bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel.

TOPCOAT over Another Coating
If applying over another coating. Install base coating layer first. Wait 2 hours then install TOPCOAT in the same application pattern as the base coating. After TOPCOAT is applied to all surfaces, immediately bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel.

Post Application Instructions
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
Climate Notes
All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature conditions. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.

Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.

Coatings are best applied in temperature controlled environments of 10°C-30°C (50°F-85°F), with humidity as low as possible.
R1380,00
Add to cart
FEYNLAB® PPF & VINYL CERAMIC 30ml
FEYNLAB® PPF & VINYL CERAMIC

FEYNLAB® PPF & VINYL CERAMIC coating is specifically designed to protect the porous surface of Vinyl or Self Healing Paint Protection Films (PPF). Originally engineered for water spot protection, the high surface tension (hydrophobic properties) of PPF & VINYL helps keep surfaces cleaner for longer. Additionally, PPF & VINYL enhances the gloss to standard PPF while allowing matte Vinyl and PPF to retain their dulled appearance.

Product Benefits
PPF & VINYL is engineered specifically to enhance self healing top coat Paint Protection Films by adding water spot protection.
- Increased UVA and UVB ray protection.
- Impressive hydrophobic and self cleaning properties and ease of maintenance on Vinyl and PPF finishes.
- Enhances gloss on appropriate finish types, while leaving both matte Vinyl & PPF surfaces with a dulled appearance.
- FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
Durability & Application Surfaces
Durability – 1 year.

Application includes 1 component layer, reaching an overall film build between 1-2 microns.

APPROVED SURFACES FOR APPLICATION ONLY:
- Vinyl & Vinyl Wrapped Surfaces
- Paint Protection Film (a.k.a. PPF or Clear Bra)
Shelf Life
Unopened – 1 year. Opened – Use within 7 days. ALWAYS keep cap on bottle when not in use.

Included
30ml (1oz) FEYNLAB® PPF & VINYL

Cautions
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

Surface Preparation
Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

Directions
Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber sponge applicators, 1 foam applicator on hand BEFORE application.

Vehicle Trim: First coat all soft plastic trim pieces, headlights, taillights, black piano trim and other porous surfaces with their appropriate coating. FEYNLAB® PLASTIC works great for this. Avoid these surfaces with ANY OTHER FEYNLAB® COATING and wipe off immediately if any product touches these surfaces.

PPF & VINYL should always be tested on a small section of paint protection film before first use. FEYNLAB® has tested the product compatibility with most major films in the industry. However, there are hundreds of films on the market, and it’s impossible to guarantee compatibility with all of them. Always perform a test spot if unsure’ preferably on a scrap piece of PPF not on the vehicle. If the product causes a small test area to become hazy, either reduce the dwell time, or stop the application completely.

Application Instructions
1. Apply enough PPF & VINYL to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
2. Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
3. Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
4. After application, step back and look for any areas missed or those with excess product. If found, smooth out evenly with the applicator sponge. This will ensure even drying across the panel and minimize excess product usage.
5. Allow PPF & VINYL to dwell on the panel a minimum of 15-20 min, until it is about 75% dry. Dwell time may vary depending on humidity and temperature. * Humid Climates 75%+ = Shorter Dwell time.
6. To test removal readiness: lightly swipe a small spot with a gloved finger and looking for a clean swipe. If the swipe reveals a clean trail then remove, if the swipe smears then allow it to dwell longer. Repeat swipe test again in 2-5 min increments to determine wipe times.
7. Wipe off PPF & VINYL following same pattern of application, using a clean microfiber towel.
Recommended Maximum Area of Application:
Half a Panel, then wipe off in same pattern as application. Varies depending on the vinyl or PPF manufacturer. Always perform a test spot to determine the appropriate manageable area of application.

Final Inspection
Carefully inspect all finished panels for leftover coating residue (high spots) before moving on to the rest of the car. Commonly edges, emblems and tight spaces tend to hold remaining product. High spots are much easier to remove if you catch within a 20-40 min window after final wipe than later on.

Post Application Instructions
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER
Climate Notes
All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature conditions. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.

Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.

Coatings are best applied in temperature controlled environments of 10°C-30°C (50°F-85°F), with humidity as low as possible.
R2990,00
Read more
FEYNLAB® PLASTIC 30ml
FEYNLAB® PLASTIC transforms faded dull exterior trim back into a deep rich looking finish. PLASTIC grants a new chemical structure which adds UV protection from future fading.

Once PLASTIC is Fully Cured, it is recommended to top with Topcoat for extra protection and hydrophobics.

Durability & Application Surfaces:
Durability – 1 yr.

Application includes 1 component layer, reaching an overall film build between 1-2 microns.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Exterior textured plastics
- Exterior plastic bumpers
Shelf Life:
Unopened – 1 year. Opened – Use within 7 days. ALWAYS keep cap on bottle when not in use.

Included:
30ml (1oz) FEYNLAB® PLASTIC

Cautions:
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

Surface Preparation:
Thoroughly clean vehicle using FEYNLAB® PURE WASH vehicle to remove all topical contamination. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME.

Directions:
Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination
free environment.

Shake PLASTIC vigorously for 1 min before use.

Application Instructions:
- Using the microfiber applicator, apply a small amount of PLASTIC and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
- Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
- After 5 min, go back to starting place and wipe any excess product to even out surface.
Note: The amount of product required will vary based upon the overall composition of the plastic trim type and the starting condition. More oxidized faded trim may require more product for restoration. For extremely faded plastic use FEYNLAB®PLASTIC BLACK.

Final Inspection:
Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

Post Application Instructions:
- HIGHLY RECOMMENDED: Cure surfaces in the sun right after application as long as possible.
- Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
Climate Notes:
All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 80% or higher then consider lessening the recommended dwell and wipe times for the coating.

If possible apply coating in temperature controlled environment 10°C-30°C (50°F-85°F), with humidity as low as possible.
R1184,50
Add to cart
GLOSSWORX WHEEL AND TYRE CLEANER

Description

GW WHEEL AND TYRE CLEANER. It’s safe for use on all tires and wheels. Not only does it renew the original beauty and lustre to the tires surface; it does is quickly and safely! frequent use will not damage or abrade the tire surface. It leaves the wheels with and amazing shine as it easily removes, road tar, brake dust, grease, grit and grime. Even the harshest sidewall sludge and scuffs are no match for GW WHEEL AND TYRE CLEANER ! GW WHEEL AND TYRE CLEANER uses special optical brightness to give your wheels the perfect finish!

R508,53
Add to cart
GLOSSWORX WASH MITT
R251,74
Add to cart
GLOSSWORX PLUSH MICROFIBER TOWELS (10pack)

10 x High quality GW plush microfiber towels are ideal for cleaning, buffing, polishing & drying your vehicle. It can be utilized on many surfaces e.g Glass, Paint, Trim, Leather and many more. These microfiber towels provide better absorbency and more scrubbing power than cotton cloths, it lifts and traps dirt and moisture, leaving surfaces clean, dry and polished.

R286,35
Read more
FEYNLAB® PRIME 250ML
PRIME is the second step in the FEYNLAB optimal bonding system. After using FEYNLAB® PURE WASH (step 1) to clean the surface, PRIME is used as the decontamination or ‘clay bar’ lubricant.

The name is born from its function. Think of PRIME as a way of filling in the micro voids of the paint structure with a more stable base for a coating to adhere to. This increased surface area and chemical bonding allows all FEYNLAB® coatings unrivaled adhesion to the painted surface. This step also helps enhance overall coating durability and performance.

PRIME Benefits:
- True nano technology allows PRIME to cleanse paint deep inside the paint’s pores.
- Prime lays down base chemistry within the porous paint structure, enhancing the bonding of coating applications.
- FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
Included:
250ml of Concentrate

Dilution Ratio:
Mix PRIME to a 1:15 dilution. 1 part Concentrate to 15 parts Water.

Directions:
Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness. Clean the surface with FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.

Spray liberally to panels in order to adequately lubricate the surface for the clay or decontamination mitt. After the physical decontamination is completed, simply wipe off any remaining product with a plush microfiber towel.

Notes:
Since PRIME penetrates so deeply into the paint’s structure, a large portion of it will remain after polishing, helping to promote optimal adhesion and performance of all FEYNLAB coatings.
R848,70
Add to cart
GLOSSWORX GW WET WHEELS

Product Description

GW WET WHEELS produces a deep, rich, long lasting shine on all exterior rubber and plastic surfaces. Rejuvenate old, weathered surfaces and enhance new rubber and plastic.

GW super shine is for people that prefer a deep, wet-looking gloss. The finish indicates that your car is a well looked after. Your tires will look freshly dressed all the time, and the rubber will remain in tiptop condition.

DIRECTIONS:
Clean the wheels and tires thoroughly with GW Mag and Wheel Cleaner. Make sure the tires are dry before applying tire dressing.
Spray a small amount onto a tire dressing applicator. Apply a thin coat to each tire.
Allow it to cure for 30 minutes before applying additional coats or driving. It adds a wet-looking gloss to tires that last for weeks, not days.

R1359,88
Read more